Description
Specification
| Printing Method | 24 Dot Matrix |
| Printing Direction | Unidirectional or bidirectional printing |
| Resolution | 180 x 180 DPI (Max.) |
Print Speed
| Normal Speed | High Speed | Super High Speed |
|---|---|---|
| 1.5lines/s (25 columns, 10 cpi) |
1.5lines/s (25 columns, 10 cpi) |
5 lines/s (25 columns, 10 cpi) |
| 6.35mm/s | 10.58mm/s | 21.12mm/s |
Character
| Paper feed speed | 140 mm/s (Max.) |
| Copy | Original + 1 copy |
| Paper Type | Roll paper (normal paper, black mark paper, copy paper) |
Paper Spec
| Paper model | Normal single sheet roll paper Normal two-sheet copy paper |
| Paper Width | 45 0.5mm, 57.5 0.5mm, 76 0.5mm, 80 + 0.5mm |
| Thickness | Single sheet roll paper: 0.06 ~ 0.085 mm Single sheet copy paper (each page): 0.05 ~ 0.08mm, total thickness < 0.14 mm |
| Maximum diameter | 100mm [ Note: The inner diameter of paper shaft is 12.0 mm and the outer diameter of paper shaft is 16mm. ] |
| Printing width | Max. 63.4 mm |
Character Per Line
| Paper Width | 76 + 0.5 mm | 57.5 + 0.5 mm | 57.5 + 0.5 mm |
| ASCII charater (10CPI) | 25 CPL | 19 CPL | 19 CPL |
Physical
| Character set | ASCII : character set, International character set |
| Character size | ASCII : 2.54 x 2.54 mm Character dot matrix : 24 x 24 |
| Character pitch | ASCII : 10 CPI, 12 CPI, 15 CPI, and proportional pitch |
| Line spacing | 1/6 inch, 1/8 inch, programmable in 1/360 inch increments |
| Barcode | EAN-13, EAN-8 Interleaved 2 of 5, Matrix 2of 5, Industrial 2, of 5, Code 39, Code 128 B, Code 128 C, NW-7 |
| Two-diamension code | QR code, Chinese-sensible code |
| Character pitch | ASCII : 10 CPI, 12 CPI, 15 CPI, and proportional pitch |
| Emulation | EPSON ESC/PK2, ESC / POS |
| Ribbon | Model : JMR137 ( support to replace the ribbon core JMR214 ) Life : 3 million characters |
| Cutting Method | Auto (Full cut, partial cut) [ Note: Only valid with auto-cutter type. ] |
| Auto cutter | Cutting speed: 30 times/ minute (Max.) Cutting thickness: 0.065 ~ 0.14 mm Cutter life: 1.5 million times [ Note: This instruction is achieved under the condition of specified paper in laboratory. ] |
| Interface | This printer can be equipped with the following interfaces: Parallel interface: Centronics USB interface: (2.0 Full-full-Speed) Serial interface [RS-232 (DB9)] USB interface (2.0 Full-full-Speed) +Ethernet interface ( 10/100 base-T) USB interface (2.0 Full-Speed) + Serial interface [RS-232C (DB9] + Ethernet interface ( 10/100 Base-T ) USB interface (micro) + Bluetooth Wifi (802.11b/g/n) USB interface (micro) + wi-fi (802.11b/g/n_) [ Note : 1. Only one of the data interface is supplied when leaving the factory. 2. Please take the specific interface as standard. ] |
| Cash drawer interface | RJ-11 , 24V (DC) / 1A |
| Black mark | Standard |
| Input buffer | 256KB |
Environment & Power
| Operating environment | Temperature: 5 ~ 35 C Humidity: 25 ~ 80% RH ( No condensation ) |
| Storage environment | Temperature: 40 ~ 55 C Humidity: < 93% RH ( 40 C ( No condensation) |
| Weight | Approximately 2.7Kg ( With auto-cutter type ) Approximately 2.5Kg ( Without auto-cutter type ) |
| Noise | < 54 db (A) (ISO7779 standard) |
| Control Panel | 2 Keys and 3 LEd indicators |
| Physical Dimension | 163 mm (Width) x 262 mm (Depth) x 145 mm (Height) |
| Power Supply | Voltage: 198 ~ 242 V (AC) Frequency: 50 ~ 60 Hz |
| Power Consumption | Operating: 40 W; 2 Standby: Approximately 2.5 W [ Note: Only when the product is unconnected with outer power supply, can it achieve zero energy consumption state. ] |
