iData 50P

iData 50P Android Mobile Computer

iData 50P is an Android touch terminal which is similar to a smartphone yet with reasonable cost. Equipped with enterprise-level data collection and network communication, it can work both indoor and outdoor.

The ultra-rugged design empowers the device to combat with all kinds of difficulties at work.


System Configuration

Processor Octa-core 2.0 GHz high-performance
Operating System Android 9.0 (GMS) / Android 11.0 (GMS)
Memory (ROM+RAM) 64 GB + 4 GB , 16GB + 2GB (optional)
SIM Single SIM card
Expansion Slot Micro SD card (up to 256GB)
Display Screen 4.7-inch, resolution: 1280*720 pixels
Touch Screen Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation
Camera 8 megapixels of rear camera (optional: 13 megapixels), 5 megapixels of front camera
Flashlight 800mA flashlight
Keypad 9 keypads in total: front key X 4, side scan key x 2, side power key x 1, side customize key x 2
Battery 3.85V lithium battery, with 4000mAh, detachable
Audio Built-in microphone
Charging Method Type-C charging and pin port charging, support 18W fast charging
Reminder Vibration reminder/LED reminder/Audio reminder
Vibrating Motor Built-in vibrating motor
Sensors G-sensor / Proximity sensor / Light sensor
Intercom Function (Optional) Support one-button PTT calls

Scanning Engine

Barcode Type It can scan one-dimensional / two-dimensional barcodes
Scanning Accuracy ≧3.33mil
Scanning Angle Pitch: ±60°;Skew:±45°;Tilt:360°
View Angle ≧Horizontal:44.3°,Vertical:28.4°,Diagonal:51°
Motion ErrorTolerance 8m/s

Structural Parameters

Dimensions (LxWxD) 150mm x 73.5mm x 16mm
Weight 230g (battery included)

Communication Transmission

WWAN (Network frequency) China & Eurasian version:
2G: B2/B3/B5/B8
4G: FDD-LTE: B1/B3/B5/B7/B8/B20,TDD-LTE: B34/B38/B39/B40/B41
American version:
2G: B2/B3/B5
3G: B1/B2/B4/B5,CDMA&EVDO:BC0/BC1 (The United States)
4G: B1/B2/B3/B4/B5/B7/B12/B17/B28A/B28B/B41
(Data service)
Wireless LAN Wi-Fi 802.11 a/b/g/n/ac/d/e/h/i/j/k/r/v (2.4G + 5G dual-band Wi-Fi), support fast roaming, support Wi-Fi 5G PA amplifier
Bluetooth Bluetooth 5.0
PSAM Card Support

Environmental Parameter

Working Temperature -20℃ -60℃
*Do not charge under low temperature conditions for the safety
Storage Temperature -40℃ -70℃ (without the battery)
Humidity 0 -95% (no moisture condensation)
Drop Specification Multiple drops to marble floor from the height of 1.5m
Ingress Protection IP67
ESD Protection ±15KV (air discharge), ±8KV (contact discharge),
anti-surge design

Communication Interface

USB Interface Type-C (with headset function) *1
OTG Interface Support

NFC (Optional)

Frequency 13.56 MHz
Reading Distance Within 30 mm
Protocol ISO14443A/14443B/15693

Development Support

Programming Language Java
Development API iScanAPI (Scanning Development Kits),
Device API (Device Management/Configuration Development Kits),
Android Standard Interface
Development Tool Eclipse/Android Studio


Standard USB cable*1, power adapter*1, hand strap*1, battery*1
Optional Single charging cradle, bottom charger, 4-slot charging cradle, 4-slot battery charging cradle, pistol grip, fanny pack, protective film, protective case, 2-in-1 charging cradle